1. Vahid Hoseini , Mahmoud Shariati , Mehdi Mirzababaee , Masoud Mahdizadeh Rokhi , تحلیل تجربی و عددی جذب انرژی توسط لوله های آلومینیومی جدار ضخیم توخالی و پرشده با فوم با درنظر گرفتن مدل‌های آسیب متفاوت , مهندسی مکانیک دانشگاه تبریز , Volume ( 51 ) , 2022-3, Pages 67-76
  2. Majid Eskandari Shahraki , Mahmoud Shariati , nasser asiyaban , Bending and Buckling Analysis of a Nth-Order Shear Deformation Nanoplate using Modified Couple Stress Theory , International Journal of Advanced Design and Manufacturing Technology , Volume ( 14 ) , 2021-12, Pages 27-36
  3. hasan naji mehr , Mahmoud Shariati , Pedram Zamani , Lucas F. M. da Silva , Danial Ghahremani Moghadam , Investigating on the influence of multi‐walled carbon nanotube and graphene nanoplatelet additives on residual strength of bonded joints subjected to partial fatigue loading , Journal of Applied Polymer Science , 2021-12
  4. A. Dadrasi , Mahmoud Shariati , h.A. Farzi , S. Fooladpanjeh , Experimental, Modeling, and Optimization Investigation on Mechanical Properties and the Crashworthiness of Thin-Walled Frusta of Silica/Epoxy Nano-composites: Fuzzy Neural Network, Particle Swarm Optimization/Multivariate Nonlinear Regression, and Gene Expression Programming , Journal of Materials Engineering and Performance , 2021-11
  5. Majid Eskandari Shahraki , Mahmoud Shariati , Naser ASIABAN , Jafar ESKANDARI JAM , Bending, Buckling and Vibrations Analysis of the Graphene Nanoplate Using the Modified Couple Stress Theory , Mechanika , Volume ( 72 ) , 2021-7, Pages 376-384
  6. ehsan chabok , Mahmoud Shariati , Mehran Kadkhodayan , Reza Masoudinejad , Fatigue Assessment of 2024-T351 Aluminum Alloy Under Uniaxial Cyclic Loading , Journal of Materials Engineering and Performance , Volume ( 30 ) , 2021-4, Pages 2864-2875
  7. Davoud Asadollahi , Mahmoud Shariati , Investigation of shear forces in twisted carbon nanotube bundles using a structural mechanics approach , Acta Mechanica , Volume ( 232 ) , 2021-3, Pages 2425-2441
  8. Reza Karimi , Mahmoud Shariati , Experimental and Numerical Analysis of Ratcheting Behavior of SS 316L Thin-Walled Pipes Subjected to Cyclic Internal Pressure , Journal of Pressure Vessel Technology , Volume ( 142 ) , 2020-12, Pages 1-10
  9. ALI DINI , Mahmoud Shariati , Fatemeh Zarghami , Mohammad Amin Nematollahi , Size-dependent analysis of a functionally graded piezoelectric micro-cylinder based on the strain gradient theory with the consideration of flexoelectric effect: plane strain problem , Journal of the Brazilian Society of Mechanical Sciences and Engineering , Volume ( 42 ) , 2020-7
  10. Amin Saber , Mahmoud Shariati , Reza Masoudinejad , Experimental and numerical investigation of effect of size, position and geometry of some cutouts on fatigue life and crack growth path on AISI1045 steel plate , Theoretical and Applied Fracture Mechanics , Volume ( 107 ) , 2020-6, Pages 102506-102518
  11. Seyyed Mehdi Hosseini Farrash , Mahmoud Shariati , Jalil Rezaee Pazhand , Dynamic Characteristics of Functionalized Carbon Nanotube Reinforced Epoxy Composites: An Experimental Approach , Journal of Solid Mechanics , Volume ( 12 ) , 2020-6, Pages 358-365
  12. Shokoofeh Dolati , Mahmoud Shariati , Jalil Rezaee Pazhand , The hail impactor shape with an ice impact response of the laminated composites reinforced with different nanomaterials: an experimental approach , Iranian Polymer Journal , Volume ( 29 ) , 2020-5, Pages 467-478
  13. A. Dadrasi , Gh.A. Farzi , Mahmoud Shariati , S. Fooladpanjeh , V. Parvaneha , Experimental study and optimization of fracture properties of epoxy-based nano-composites: Effect of using nano-silica by GEP, RSM, DTM and PSO , Engineering Fracture Mechanics , Volume ( 232 ) , 2020-5, Pages 1-14
  14. Reza Masoudi Nejad , Mohammadreza Tohidi , Ahmad Jalayerian Darbandi , Amin Saber , Mahmoud Shariati , Experimental and numerical investigation of fatigue crack growth behavior and optimizing fatigue life of riveted joints in Al-alloy 2024 plates , Theoretical and Applied Fracture Mechanics , Volume ( 108 ) , 2020-5, Pages 102669-17
  15. FARHAD ALINAGHIZADEH , Mahmoud Shariati , Nonlinear analysis of size-dependent annular sector and rectangular microplates under transverse loading and resting on foundations based on the modified couple stress theory , Thin-Walled Structures , Volume ( 149 ) , 2020-4, Pages 106583-106597
  16. Saeed Abolghasemi , Hamidreza Eipakchi , Mahmoud Shariati , An analytical solution for buckling of plates with circular cutout subjected to non-uniform in-plane loading , Archive of Applied Mechanics , Volume ( 89 ) , 2019-12, Pages 2519-2543
  17. Shokoofeh Dolati , Jalil Rezaee Pazhand , Mahmoud Shariati , Numerical simulation of hail impact response of hybrid corrugated core sandwich panels , Journal of Reinforced Plastics and Composites , Volume ( 38 ) , 2019-12, Pages 643-657
  18. Reza Masoudinejad , Mahmoud Shariati , Khalil Farhangdoost , A. Atrian , Rolling contact fatigue analysis of rails under the in uence of residual stresses induced by manufacturing , Scientia Iranica , Volume ( 26 ) , 2019-7, Pages 1427-1437
  19. H. Ghasemi , R. Masoudi Nejad , AHMAD JALAYERIAN DARBANDI , Y. Tadi Beni , Mahmoud Shariati , Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels , Scientia Iranica , 2019-7
  20. Reza Masoudinejad , Mahmoud Shariati , Khalil Farhangdoost , Prediction of fatigue crack propagation and fractography of rail steel , Theoretical and Applied Fracture Mechanics , Volume ( 101 ) , 2019-3, Pages 320-331
  21. majid akbarzadeh khorshidi , Mahmoud Shariati , INVESTIGATION OF FLEXIBILITY CONSTANTS FOR A MULTI-SPRING MODEL: A SOLUTION FOR BUCKLING OF CRACKED MICRO/NANOBEAMS , Journal of Theoretical and Applied Mechanics , Volume ( 57 ) , 2019-1, Pages 49-58
  22. S. Abolghasemi , H.R. Eipakchi , Mahmoud Shariati , Investigation of Pre-buckling Stress Effect on Buckling Load Determination of Finite Rectangular Plates with Circular Cutout , Journal of Solid Mechanics , Volume ( 10 ) , 2018-11, Pages 816-830
  23. Mahmoud Shariati , Majid Mirzaei , Reza Masoudinejad , An applied method for fatigue life assessment of engineering components using rigid-insert crack closure model , Engineering Fracture Mechanics , Volume ( 204 ) , 2018-10, Pages 421-433
  24. M. Mohammadian , Mahmoud Shariati , Application of AG method and its improvement to nonlinear damped oscillators , Scientia Iranica , 2018-10
  25. kamal kolasangiani , Mahmoud Shariati , Khalil Farhangdoost , A. Varvani ‐ Farahani , Ratcheting progress at notch root of 1045 steel samples over asymmetric loading cycles: Experiments and analyses , Fatigue and Fracture of Engineering Materials and Structures , Volume ( 41 ) , 2018-9, Pages 1870-1883
  26. ALI DINI , A. Zandi-Baghche-Maryam , Mahmoud Shariati , Effects of van der Waals forces on hygro-thermal vibration and stability of fluid-conveying curved double-walled carbon nanotubes subjected to external magnetic field , Physica E , Volume ( 106 ) , 2018-9, Pages 156-169
  27. kamal kolasangiani , Khalil Farhangdoost , Mahmoud Shariati , A. Varvani-Farahani , Local ratcheting behavior in notched 1045 steel plates , Steel and Composite Structures , Volume ( 28 ) , 2018-7, Pages 1-11
  28. M. Heidarhaei-Student , Mahmoud Shariati , H.R. Eipakchi , Effect of interfacial debonding on stress transfer in graphene reinforced polymer nanocomposites , International Journal of Damage Mechanics , Volume ( 27 ) , 2018-7, Pages 1105-1127
  29. Seyyed Mehdi Hosseini Farrash , Jalil Rezaee Pazhand , Mahmoud Shariati , Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites , Mechanics of Advanced Composite Structures , Volume ( 5 ) , 2018-6, Pages 41-48
  30. Reza Masoudinejad , Khalil Farhangdoost , Mahmoud Shariati , Microstructural analysis and fatigue fracture behavior of rail steel , Mechanics of Advanced Materials and Structures , Volume ( 27 ) , 2018-5, Pages 152-164
  31. kamal kolasangiani , Khalil Farhangdoost , Mahmoud Shariati , A. Varvani-Farahani , Ratcheting assessment of notched steel samples subjected to asymmetric loading cycles through coupled kinematic hardening-Neuber rule , International Journal of Mechanical Sciences , Volume ( 144 ) , 2018-5, Pages 24-32
  32. Seyed Morteza Hosseini , Mahmoud Shariati , Experimental analysis of energy absorption capability of thin-walled composite cylindrical shells by quasi-static axial crushing test , Thin-Walled Structures , Volume ( 125 ) , 2018-2, Pages 259-268
  33. Reza Naseri , hamed hiradfar , Mahmoud Shariati , Mehran Kadkhodayan , A comparison of axial fatigue strength of coarse and ultrafine grain commercially pure titanium produced by ECAP , Archives of Civil and Mechanical Engineering , Volume ( 18 ) , 2018-1, Pages 755-767
  34. Hamid Zabihi Ferezqi , Mahmoud Shariati , Saeid Hadidi Moud , The Assessment of Elastic Follow-Up Effects on Cyclic Accumulation of Inelastic Strain Under Displacement-Control Loading , Iranian Journal of Science and Technology-Transactions of Mechanical Engineering , Volume ( 42 ) , 2018-1, Pages 127-135
  35. R. Rezaei , H. Tavakoli-Anbaran , Mahmoud Shariati , Mechanical Characteristics and Failure Mechanism of Nano-Single Crystal Aluminum Based on Molecular Dynamics Simulations: Strain Rate and Temperature Effects , Journal of Solid Mechanics , Volume ( 9 ) , 2017-12, Pages 794-801
  36. H. Hatami , Mahmoud Shariati , Numerical and Experimental Investigation of SS304L Cylindrical Shell with Cutout Under Uniaxial Cyclic Loading , مهندسی مکانیک ایران-Iranian Journal of Mechanical Engineering Transactions of the ISME , 2017-12, Pages 1-15
  37. Reza Naseri , Mehran Kadkhodayan , Mahmoud Shariati , Static mechanical properties and ductility of biomedical ultrafine-grained commercially pure titanium produced by ECAP process , Transactions of Nonferrous Metals Society of China , Volume ( 27 ) , 2017-11, Pages 1964-1975
  38. kamal kolasangiani , Mahmoud Shariati , Khalil Farhangdoost , A. Varvani-Farahani , Numerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading , Journal of Solid Mechanics , Volume ( 9 ) , 2017-11, Pages 811-820
  39. H. Asadollahi-Yazdi , Mahmoud Shariati , A. Imam , M. Ghatee , Optimizing Mechanical Properties of POM/Graphene Nanocomposites Prepared by Spray Method , International Journal of Advanced Design and Manufacturing Technology , Volume ( 10 ) , 2017-9, Pages 43-50
  40. majid akbarzadeh khorshidi , Mahmoud Shariati , A multi-spring model for buckling analysis of cracked Timoshenko nanobeams based on modified couple stress theory , Journal of Theoretical and Applied Mechanics , Volume ( 55 ) , 2017-9, Pages 1127-1139
  41. Seyyed Mehdi Hosseini Farrash , Mahmoud Shariati , Jalil Rezaee Pazhand , Influence of the V acancies on the B uckling B ehavior of a Single – Layered G raphene N anosheet , Journal of Solid Mechanics , Volume ( 9 ) , 2017-9, Pages 543-554
  42. majid akbarzadeh khorshidi , Mahmoud Shariati , Buckling and postbuckling of size-dependent cracked microbeams based on a modified couple stress theory , Journal of Applied Mechanics and Technical Physics , Volume ( 58 ) , 2017-8, Pages 717-724
  43. Reza Naseri , Mehran Kadkhodayan , Mahmoud Shariati , An experimental investigation of casing effect on mechanical properties of billet in ECAP process , International Journal of Advanced Manufacturing Technology , Volume ( 90 ) , 2017-6, Pages 3203-3216
  44. M. Zeinoddini , M. Mo’tamedi , A.P. Zandi , M. Talebi , Mahmoud Shariati , M. Ezzati , On the ratcheting of defective low-alloy, high-strength steel pipes (API-5L X80) under cyclic bending: An experimental study , International Journal of Mechanical Sciences , Volume ( 130 ) , 2017-6, Pages 518-533
  45. H. Asadollahi-yazdi , Mahmoud Shariati , A. Imam , M. Ghatee , Investigating the mechanical properties of layered graphene/polyoxymethylene nanocomposites prepared by the spray method , Journal of Composite Materials , Volume ( 51 ) , 2017-6, Pages 3053-3064
  46. kamal kolasangiani , Mahmoud Shariati , A new species of Ligyra Newman from Roraima, Brazil (Diptera, Bombyliidae, Anthracinae) , International Journal of Steel Structures , Volume ( 12 ) , 2017-5, Pages 123-125
  47. Seyyed Mehdi Hosseini Farrash , Mahmoud Shariati , Jalil Rezaee Pazhand , The effect of carbon nanotube dispersion on the dynamic characteristics of unidirectional hybrid composites: An experimental approach , Composites Part B: Engineering , Volume ( 122 ) , 2017-4, Pages 1-8
  48. Mostafa Mohammadian , Mahmoud Shariati , Approximate analytical solutions to a conservative oscillator using global residue harmonic balance method , Chinese Journal of Physics , Volume ( 55 ) , 2017-2, Pages 47-58
  49. FARHAD ALINAGHIZADEH , Mahmoud Shariati , Jacob Fish , Bending analysis of size- dependent functionally graded annular sector microplates based on the modified couple stress theory , Applied Mathematical Modelling , Volume ( 44 ) , 2017-2, Pages 540-556
  50. Mahmoud Shariati , E. Mohammadi , Reza Masoudinejad , Effect of a new specimen size on fatigue crack growth behavior in thick-walled pressure vessels , International Journal of Pressure Vessels and Piping , Volume ( 150 ) , 2017-1, Pages 1-10
  51. majid akbarzadeh khorshidi , M. Shaat , A. Abdelkefi , Mahmoud Shariati , Nonlocal modeling and buckling features of cracked nanobeams with von Karman nonlinearity , Applied Physics A: Materials Science and Processing , Volume ( 123 ) , 2017-1, Pages 1-12
  52. Saeed Abolghasemi , Hamidreza Eipakchi , Mahmoud Shariati , An analytical solution for axisymmetric buckling of annular plates based on perturbation technique , International Journal of Mechanical Sciences , Volume ( 123 ) , 2017-1, Pages 74-83
  53. Reza Rezaei , Chuang Deng , Mahmoud Shariati , Hossein Tavakoli-Anbaran , The ductility and toughness improvement in metallic glass through the dual effects of graphene interface , Journal of Materials Research , Volume ( 32 ) , 2017-1, Pages 392-403
  54. Pedram Zamani , Abdolrahman Jaamialahmadi , Mahmoud Shariati , Ductile Failure and Safety Optimization of Gas Pipeline , Journal of Solid Mechanics , Volume ( 8 ) , 2016-12, Pages 744-755
  55. Mahmoud Shariati , kamal kolasangiani , Hadi Golmakani , Cyclic behavior of SS316L cylindrical shells under pure torsional load: An experimental investigation , Thin-Walled Structures , Volume ( 109 ) , 2016-10, Pages 242-250
  56. Mahmoud Shariati , Reza Masoudinejad , Fatigue Strength and Fatigue Fracture Mechanism for Spot Welds in U-Shape Specimens , Latin American Journal of Solids and Structures , Volume ( 13 ) , 2016-8, Pages 2487-2501
  57. Mahmoud Shariati , Y. Faradjian , H. Mehrabi , Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout , Journal of Solid Mechanics , Volume ( 8 ) , 2016-8, Pages 116-129
  58. Reza Masoudinejad , Khalil Farhangdoost , Mahmoud Shariati , Majid Moavenian , Stress Intensity Factors Evaluation for Rolling Contact Fatigue Cracks in Rails , Tribology Transactions , Volume ( 60 ) , 2016-7, Pages 645-652
  59. majid akbarzadeh khorshidi , Mahmoud Shariati , Free vibration analysis of sigmoid functionally graded nanobeams based on a modified couple stress theory with general shear deformation theory , Journal of the Brazilian Society of Mechanical Sciences and Engineering , Volume ( 38 ) , 2016-7, Pages 2607-2619
  60. Mohammed Shaat , majid akbarzadeh khorshidi , Abdessattar Abdelkefi , Mahmoud Shariati , Modeling and Vibration Characteristics of Cracked Nano-Beams Made of Nanocrystalline Materials , International Journal of Mechanical Sciences , Volume ( 115-116 ) , 2016-6, Pages 574-585
  61. Vali Parvaneh , Mahmoud Shariati , Experimental analysis of the low cycle fatigue of a spray-coated layered multi-walled carbon nanotubes/polyvinyl chloride nanocomposite , Journal of Composite Materials , Volume ( 50 ) , 2016-5, Pages 1555-1562
  62. Reza Masoudinejad , Mahmoud Shariati , Khalil Farhangdoost , Three-dimensional finite element simulation of residual stresses in UIC60 rails during the quenching process , Thermal Science , Volume ( 21 ) , 2016-4, Pages 1301-1307
  63. majid akbarzadeh khorshidi , Mahmoud Shariati , Samir A. Emam , Postbuckling of functionally graded nanobeams based on modified couple stress theory under general beam theory , International Journal of Mechanical Sciences , Volume ( 110 ) , 2016-4, Pages 160-169
  64. Reza Rezaei , Mahmoud Shariati , Hossein Tavakoli Anbaran , Chuang Deng , Mechanical characteristics of CNT-reinforced metallic glass nanocomposites by molecular dynamics simulations , Computational Materials Science , Volume ( 119 ) , 2016-4, Pages 19-26
  65. majid akbarzadeh khorshidi , Mahmoud Shariati , An investigation of stress wave propagation in a shear deformable nanobeam based on modified couple stress theory , Waves in Random and Complex Media , Volume ( 26 ) , 2016-4, Pages 243-258
  66. Mahmoud Shariati , Amin Akbarpour , Some considerations on instability of combined loaded thin-walled tubes with a crack , Journal of Applied Mechanics and Technical Physics , Volume ( 57 ) , 2016-4, Pages 518-526
  67. Reza Masoudinejad , Mahmoud Shariati , Khalil Farhangdoost , Effect of wear on rolling contact fatigue crack growth in rails , Tribology International , Volume ( 94 ) , 2016-2, Pages 118-125
  68. Reza Masoudinejad , Khalil Farhangdoost , Mahmoud Shariati , Three-Dimensional Simulation of Rolling Contact Fatigue Crack Growth in UIC60 Rails , Tribology Transactions , Volume ( 59 ) , 2016-2, Pages 1059-1069
  69. FARHAD ALINAGHIZADEH , Mahmoud Shariati , Geometrically non-linear bending analysis of thick two-directional functionally graded annular sector and rectangular plates with variable thickness resting on non-linear elastic foundation , Composites Part B: Engineering , Volume ( 86 ) , 2016-1, Pages 61-83
  70. Saeed Abolghasemi , H. R. Eipakchi , Mahmoud Shariati , An analytical procedure to study vibration of rectangular plates under non-uniform in-plane loads based on first-order shear deformation theory , Archive of Applied Mechanics , Volume ( 86 ) , 2016-1, Pages 853-867
  71. majid akbarzadeh khorshidi , Mahmoud Shariati , A Modified Couple Stress Theory for Postbuckling Analysis of Timoshenko and Reddy-Levinson Single-Walled Carbon Nanobeams , Journal of Solid Mechanics , Volume ( 7 ) , 2015-12, Pages 364-373
  72. FARHAD ALINAGHIZADEH , Mahmoud Shariati , Buckling Analysis of Variable Thickness Radially Functionally Graded Annular Sector Plates Resting on Two-Parameter Elastic Foundations by the GDQ Method , International Journal of Applied Mechanics , Volume ( 07 ) , 2015-12, Pages 1550083-32
  73. Mahmoud Shariati , G.A. Farzi , A. Dadrasi- , M. Amiri , R. Rashidi Meybodi , An Experimental Study on Toughening Mechanisms of Fillers in Epoxy/ Silica Nanocomposites , بین المللی نانو علم و فناوری - International Journal of NanoScience and Nanotechnology , Volume ( 11 ) , 2015-10, Pages 193-199
  74. FARHAD ALINAGHIZADEH , Mahmoud Shariati , Static analysis of variable thickness two‑directional functionally graded annular sector plates fully or partially resting on elastic foundations by the GDQ method , Journal of the Brazilian Society of Mechanical Sciences and Engineering , Volume ( 37 ) , 2015-10, Pages 1819-1838
  75. Mahmoud Shariati , Hamed Mehrabi , An investigation of the fatigue of CK45 steel in the as-received state and after pre-fatigue deformation , Fatigue and Fracture of Engineering Materials and Structures , Volume ( 38 ) , 2015-9, Pages 489-502
  76. Vali Parvaneh , Mahmoud Shariati , Ahmad Nezakati Reza Zadeh , Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites , International Journal of Nano Dimension , Volume ( 6 ) , 2015-9, Pages 509-516
  77. Mahmoud Shariati , H. Sadeghi , M. Ghannad , H. Gharooni , Semi Analytical Analysis of FGM Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Elastic Modulus under Internal Pressure , Journal of Solid Mechanics , Volume ( 7 ) , 2015-6, Pages 131-145
  78. kamal kolasangiani , Mahmoud Shariati , Khalil Farhangdoost , Prediction of forming limit curves (FLD, MSFLD and FLSD) and necking time for SS304L sheet using finite element method and ductile fracture criteria , Journal Of Computational And Applied Research In Mechanical Engineering , Volume ( 4 ) , 2015-4, Pages 121-132
  79. Reza Masoudinejad , Khalil Farhangdoost , Mahmoud Shariati , Numerical study on fatigue crack growth in railway wheels under the influence of residual stresses , Engineering Failure Analysis , Volume ( 52 ) , 2015-4, Pages 75-89
  80. Mahmoud Shariati , Gholamali Farzi , Ali Dadrasi , Mechanical properties and energy absorption capability of thin-walled square columns of silica/epoxy nanocomposite , Construction and Building Materials , Volume ( 78 ) , 2015-1, Pages 362-368
  81. Mahmoud Shariati , A. M. Majd Sabeti , H. Gharooni , A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load , Journal Of Computational And Applied Research In Mechanical Engineering , Volume ( 4 ) , 2014-9, Pages 43-54
  82. Mahmoud Shariati , Hamed Mehrabi , Energy-Based Prediction of Low-Cycle Fatigue Life of CK45 Steel and SS316 Stainless Steel , Journal of Solid Mechanics , Volume ( 6 ) , 2014-8, Pages 278-288
  83. Mahmoud Shariati , kamal kolasangiani , Gholamreza Norouzi , Amir Shahnavaz , Experimental study of SS316L cantilevered cylindrical shells under cyclic bending load , Thin-Walled Structures , Volume ( 82 ) , 2014-5, Pages 124-131
  84. H.Torabi , Mahmoud Shariati , Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout Under Axial Compression , Strength of Materials , Volume ( 46 ) , 2014-4, Pages 531-542
  85. Hamidreza Allahbakhsh , Mahmoud Shariati , Instability of cracked CFRP composite cylindrical shells under combined loading , Thin-Walled Structures , Volume ( 74 ) , 2014-3, Pages 28-35
  86. Mahmoud Shariati , K. Kolasangiani , H.R. Epakchi , H. Chavoshan , Numerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with-without Cutout Under Cyclic Combined and Axial Loading , Journal of Solid Mechanics , Volume ( 5 ) , 2013-12, Pages 216-225
  87. Hamid Torabi , Mahmoud Shariati , Elahehsadat Sedaghat Kalantari , , Buckling behavior of perfect and defective DWCNTs under axial, bending and torsional loadings via a structural mechanics approach , Meccanica , Volume ( 48 ) , 2013-12, Pages 1959-1974
  88. Abdolhossein Fereidoon , Mahmoud Shariati , Kamal Kolasangiani , Amin Akbarpour , Study on buckling of steel cylindrical shells with an elliptical cutout under combined loading , Journal Of Computational And Applied Research In Mechanical Engineering , Volume ( 3 ) , 2013-9, Pages 13-25
  89. Masoud Mahdizadeh Rokhi-Student , Mahmoud Shariati , Implementation of the extended finite element method for coupled dynamic thermoelastic fracture of a functionally graded cracked layer , Journal of the Brazilian Society of Mechanical Sciences and Engineering , Volume ( 35 ) , 2013-6, Pages 69-81
  90. Mahmoud Shariati , H. Hatami , M. Damghani Nouri , Experimental investigations on the softening and ratcheting behaviors of steel cylindrical shell under cyclic axial loading , Journal Of Computational And Applied Research In Mechanical Engineering , Volume ( 2 ) , 2013-3, Pages 11-22
  91. Masoud Mahdizadeh Rokhi-Stud , Mahmoud Shariati , Coupled thermoelasticity of a functionally graded cracked layer under thermomechanical shocks , Archive of Applied Mechanics , Volume ( 65 ) , 2013-3, Pages 71-96
  92. H. R. Allahbakhsh , Mahmoud Shariati , M. Sedighi , Effect of stiffeners on crashworthiness of square aluminium columns considering damage evolution , Journal of Central South University , Volume ( 20 ) , 2013-2, Pages 599-607
  93. Vali Parvaneh-student , Mahmoud Shariati , Hamid Torabi , Bending buckling behavior of perfect and defective single-walled carbon nanotubes via a structural mechanics model , Acta Mechanica , Volume ( 223 ) , 2012-11, Pages 2369-2378
  94. Mahmoud Shariati , Ali Dadrasi , Numerical and Experimental Investigation of Loading Band on Buckling of Perforated Rectangular Steel Plates , Research Journal of Recent Sciences , Volume ( 10 ) , 2012-10, Pages 63-71
  95. Mahmoud Shariati , H. Hatami-Student , H. Torabi-Student , H.R. Epakchi-Associate Professor , Experimental and numerical investigations on the ratcheting characteristics of cylindrical shell under cyclic axial loading , Structural Engineering and Mechanics , Volume ( 44 ) , 2012-9, Pages 753-762
  96. Mahmoud Shariati , Amin Akbarpour , Buckling and Post Buckling Investigation of Thin Walled Shells Contain Elliptical and Circular Cutout, Subjected to Oblique Loading , Journal of Basic and Applied Scientific Research , Volume ( 9 ) , 2012-8, Pages 9548-9557
  97. Hamidreza Allahbakhsh , Mahmoud Shariati , Buckling of Cracked Laminated Composite Cylindrical Shells Subjected to Combined Loading , Applied Composite Materials , Volume ( 20 ) , 2012-8, Pages 761-772
  98. S.M.A. Hosseini , F. Sereshki , Mahmoud Shariati , S.M.E. Jalali , F. Crotogino , Development of a new creep testing equipment to obtain long-term deformation parameters of salt , Journal of Mininig and Environment , Volume ( 3 ) , 2012-6, Pages 15-20
  99. M. Norouzi , S. M. Rezaei Niya , M. H. Kayhani , Mahmoud Shariati , M. Karimi Demneh , M. S. Naghavi , Exact Solution of Unsteady Conductive Heat Transfer in Cylindrical Composite Laminates , Journal of Heat Transfer , Volume ( 134 ) , 2012-6, Pages 301-310
  100. Mahmoud Shariati , Fereidoon Abdolhosein , Akbarpour Amin , Buckling Load Analysis of Oblique Loaded Stainless Steel 316ti Cylindrical Shells with Elliptical Cutout , Research Journal of Recent Sciences , Volume ( 8 ) , 2012-4, Pages 533-63
  101. Mahmoud Shariati , Fereidoon Abdolhosein , Akbarpour Amin , Investigation on Buckling Behavior of Tubular Shells with Circular Cutout, Subjected to Combined Loading , Research Journal of Recent Sciences , Volume ( 7 ) , 2012-4, Pages 68-76
  102. Mahmoud Shariati , Amin Akbarpour , Ultimate Strength Analysis of Combined Loaded Stainless Steel Circular Tubes with Hole , Journal of Basic and Applied Scientific Research , Volume ( 2 ) , 2012-4, Pages 8457-8465
  103. Mahmoud Shariati , Ali Lashkari Zadeh-Student , Hamid Torabi-Student , Buckling analysis of carbon nanotube bundles under axial compressive, bending and torsional loadings via a structural mechanics model , Journal of Physics and Chemistry of Solids , Volume ( 73 ) , 2012-1, Pages 1282-1289
  104. Y. Faradjian Mohtaram-Student , Mahmoud Shariati , J. Taheri Kahnamouei , B. Behjat , Experimental and numerical investigation of buckling in rectangular steel plates with groove-shaped cutouts , Journal of Zhejiang University-Science A: Applied Physics & Engineering , Volume ( 13 ) , 2012-1, Pages 469-480
  105. Mahmoud Shariati , H. Hatami- Student , Experimental study of SS304L cylindrical shell with/without cutout under cyclic axial loading , Theoretical and Applied Fracture Mechanics , Volume ( 58 ) , 2012-1, Pages 35-43
  106. Vali Parvaneh , Mahmoud Shariati , Hamid Torabi , A. M. Majd Sabeti , Torsional Buckling Behavior of SWCNTs Using a Molecular Structural Mechanics Approach Considering Vacancy Defects , Fullerenes Nanotubes and Carbon Nanostructures , Volume ( 20 ) , 2012-1, Pages 709-720
  107. H.R. Eipakchi , Mahmoud Shariati , Buckling analysis of a cylindrical panel under axial stress using perturbation technique , Journal of Applied Mathematics and Mechanics , Volume ( 2 ) , 2011-12, Pages 138-145
  108. Ali Dadrasi , Mahmoud Shariati , Progressive Failure and Energy Absorption of Aluminum Extrusion Damage , Energy Science and Technology , Volume ( 2 ) , 2011-10, Pages 51-56
  109. Vali Parvaneh , Mahmoud Shariati , Effect of defects and loading on prediction of Young’s modulus of SWCNTs , Acta Mechanica , Volume ( 216 ) , 2011-9, Pages 281-289
  110. Mahmoud Shariati , M. Sedighi , J. Saemi , A. K. Poorfar , Numerical Analysis and Experimental Study of Buckling Behavior of Steel Cylindrical Panels , Steel Research International , Volume ( 82 ) , 2011-5, Pages 202-212
  111. Mahmoud Shariati , Mohammad Bagher Nazari , Mohammad Reza Eslami , Behrooz Hassani , mputation of Stress Intensity Factor in Functionally Graded Plates under Thermal Shock , Strojniski Vestnik-Journal of Mechanical Engineering , Volume ( 7-8 ) , 2011-4, Pages 622-632
  112. Vali Parvaneh , Mahmoud Shariati , Hamid Torabi , AmirMasoodMajd Sabeti , Influence of Boundary Conditions and Defects on the Buckling Behavior of SWCNTs via a StructuralMechanics Approach , Journal of Nanomaterials , Volume ( 10.12 ) , 2011-3, Pages 1-6
  113. Mahmoud Shariati , Hossein Hatami , Hossein Yarahmadi , Hamid Reza Eipakchi , An experimental study on the ratcheting and fatigue behavior of polyacetal under uniaxial cyclic loading , Materials and Design , Volume ( 34 ) , 2011-3, Pages 302-312
  114. Vali Parvaneh , Mahmoud Shariati , Hamid Torabi , Frequency analysis of perfect and defective SWCNTs , Computational Materials Science , Volume ( 50 ) , 2011-2, Pages 2051-2056
  115. Mahmoud Shariati , M.Seddighi- Student , J.Saemi- Student , Experimental and numerical studies on buckling and post-buckling behavior of cylindrical panels subjected to compressive axial load , Strength of Materials , Volume ( 43 ) , 2011-1, Pages 190-200
  116. Mahmoud Shariati , H. Hatami- Student , H. R. Eipakchi- Associate Professor , H. Yarahmadi-Student , H. Torabi-Student , Experimental and Numerical Investigations on Softening Behavior of POM Under Cyclic Strain-Controlled Loading , Polymer - Plastics Technology and Engineering , Volume ( 50 ) , 2011-1, Pages 1576-1582
  117. Mahmoud Shariati , M. Norouzi , Optimal synthesis of function generator of four-bar linkages based on distribution of precision points , Meccanica , Volume ( 46 ) , 2011-1, Pages 1007-1021
  118. Mahmoud Shariati , M. Sedighi , J. Saemi , H. R. Eipakchi , H.R. Allahbakhsh , Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load , Archives of Civil and Mechanical Engineering , Volume ( 2 ) , 2010-10, Pages 117-130
  119. M. B. Nazari , Mahmoud Shariati , M. R. Eslami , Behrooz Hassani , Meshless analysis of cracked functionally graded materials under thermal shock , Mechanika , Volume ( 84 ) , 2010-10, Pages 20-27
  120. Mahmoud Shariati , M. Sedighi , J. Saemi , H.R. Eipakchi , H.R. Allahbakhsh , Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading , Mechanika , Volume ( 4 ) , 2010-10, Pages 12-19
  121. Mahmoud Shariati , M. Sedighi , J. Saemi , H. R. Eipakchi , An experimental study on buckling and post-buckling behaviour of cylindrical panels with clamped and simply supported ends , Indian Journal of Engineering and Materials Sciences , Volume ( 17 ) , 2010-6, Pages 86-90
  122. Mahmoud Shariati , Mehdi Sedighi-Student , Jafar Saemi-Student , Hamid Reza Allahbakhsh-Student , A Numerical and Experimental Study on Buckling of Cylindrical Panels Subjected to Compressive Axial Load , Strojniski Vestnik-Journal of Mechanical Engineering , Volume ( 56 ) , 2010-5, Pages 609-618
  123. Mahmoud Shariati , A.K.Mohammadi , N.Ale Ali , Non-linear effects of suspension 0n hunting and critical velocity of railway wheelset , International Journal of Nonlinear Dynamics in Engineering and Science , Volume ( 2 ) , 2010-5, Pages 1-15
  124. Mahmoud Shariati , H.R. Allahbakhsh , Jafar Saemi , M. Sedighi , Optimization of foam filled spot-welded column for the crashworthiness design , Mechanika , Volume ( 83 ) , 2010-5, Pages 10-16
  125. H.R. Allahbakhsh-student , Mahmoud Shariati , Jafar Saemi , Crashworthiness Optimization of Foam-filled and Empty Spot-welded Columns , Australian Journal of Basic and Applied Sciences , Volume ( 4 ) , 2010-4, Pages 6404-6411
  126. Mahmoud Shariati , H.R.Allahbakhsh , Numerical and experimental investigations on the buckling of steel semi- spherical shells under various loadings , Thin-Walled Structures , Volume ( 48 ) , 2010-2, Pages 620-628
  127. Mahmoud Shariati , M. M. Rokhi-Student , Buckling of steel cylindrical shells with an elliptical cutout , International Journal of Steel Structures , Volume ( 10 ) , 2010-1, Pages 193-205
  128. Mahmoud Shariati , H.R. Allahbakhsh , Jafar Saemi , An experimental and numerical crashworthiness investigation of crash columns assembled by spot-weld , Mechanika , Volume ( 2 ) , 2010-1, Pages 21-25
  129. M. H. Kayhani , Mahmoud Shariati , M. Nourozi , M. Karimi Demneh , Exact solution of conductive heat transfer in cylindrical composite laminate , Heat and Mass Transfer , Volume ( 46 ) , 2009-11, Pages 83-94
  130. Mahmoud Shariati , Vali Parvaneh , Amir Masood Majd Sabeti , Investigation of vacancy defects effects on the buckling behavior of SWCNTs via a structural mechanics approach , European Journal of Mechanics A-Solids , Volume ( 28 ) , 2009-11, Pages 1072-1078
  131. Mahmoud Shariati , Masoud Mahdizadeh Rokhi , Investigation of Buckling of Steel Cylindrical Shells with Elliptical Cutout Under Bending Moment , International Review of Mechanical Engineering-IREME , Volume ( 3 ) , 2009-9, Pages 7-15
  132. Mahmoud Shariati , Amir Masood Majd Sabeti , Buckling and Post-Buckling of Cracked Plates under Axial Compression Load in Elastic-Plastic Mode , International Review of Aerospace Engineering , Volume ( 2 ) , 2009-4, Pages 84-90
  133. Mahmoud Shariati , Masoud Mahdizadeh Rokhi , Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression , Thin-Walled Structures , Volume ( 46 ) , 2008-11, Pages 1251-1261
  134. Mahmoud Shariati , Emad Mohammadi , Masoud Mahdizadeh Rokhi , Calculation of Stress Intensity Factor by Algebraic Emulator Based on Statistical Resultants of FRANC2D in Rotary Cracked Disks , Journal of Applied Sciences , Volume ( 8 ) , 2008-7, Pages 2924-2927
  135. Mahmoud Shariati , Mohammad Hasan Kayhani , Iman Shalchian , Effect of stacking sequence on the temperature distribution in a composite multy-layered vessel , World Applied Sciences Journal , Volume ( 3 ) , 2008-5, Pages 833-840
  136. Mahmoud Shariati , Mohammadi Emad , Calculation of Stress Intensity Factor in Rotary Cracked Disks with Central Hole by Using Emulator Technology , World Applied Sciences Journal , Volume ( 4 ) , 2008-4, Pages 696-701
  137. Mahmoud Shariati , Mohammad Javad Maghrebi , Effects of Different Parameters on The Crack Growth of Rotary Disks with Eccentricity Hole Using Emulator and Finite Element Techniques , International Journal of Mechanics and Solids , Volume ( 2 ) , 2007-9, Pages 13-28
  138. Mohammad Javad Maghrebi , Mahmood Farzaneh-Gord , Mahmoud Shariati , Compact Finite Difference Investigation of Pressure Field Governed by a Three Dimensional Wave Equation , International Journal of Applied Engineering Research , Volume ( 2 ) , 2007-7, Pages 595-607
  139. Mahmoud Shariati , An Experimental Investigation of Initiation, Propagation and the Fatigue Life of Modified Coach Peel (MCP) Spot Weld Specimens , International Journal of Applied Engineering Research , Volume ( 2 ) , 2007-4, Pages 637-657
  140. Mahmoud Shariati , Mohammad Javad Maghrebi , An Experimental Investigation of Initiation, Propagation and the Fatigue Life of Modified Coach Peel -MCP- Spot Weld Specimens , International Journal of Applied Engineering Research , Volume ( 2 ) , 2007-4, Pages 637-657